O’SKOOL 6-1/2″ Router Acrylic Universal Base Plate Fits Router Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

O

    Features:

  • Adds visibility by being clear acrylic,quick and easy to mount.
  • Diameter : 6-1/2-Inch.with centering pin and assorted screw sizes to accommodate template guide variations.
  • Prepare your router and the existing base plate and any related hardware. In the fastener package provided, locate the machine screws that match the threads in your router.
  • On the chart on this page,find the model of your router and the corresponding letter that represents the mounting hole pattern on the base plate drawing.Locate the hole pattern on the base plate and mark with wax crayon or felt tip marker.
  • Ensure your router has a 1/4″ collet installed and place the universal base onto the router lining up the marked mounting holes.Install the choosen machine screws but do not tighten. Insert the enclosed alignment pin into the 1/4″ collet until it almost contacts the guide bushing. Tighten the collet lightly onto the pin. Carefully adjust the router depth so the pin makes contact with the alignment pin.Tighten the machine screws.Note:if the machine screws supplied bottom into the router mounting

DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4 Inches – Cutter & Porter-Cable Template Guide

DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4 Inches – Cutter & Porter-Cable Template Guide

    Features:

  • BUILD A TABLE-MOUNTED ROUTER: The DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4” Inches – Cutter & Porter-Cable Template Guide lets you build your own table-mounted router safely so you can easily lift the router out of the table to change bits and safely operate; Gives you a mobile machined surface
  • FITS MOST CUTTERS: 3/8-inch thick (1cm) phenolic router plate supports any router with removable baseplate; 3 snap out bit ring openings 3-7/8 inches (black) for large raised panel cutters, 2-5/8 inches (yellow) for medium to large cutters, 1-1/4 inches (red) for small cutters and Porter-Cable template guides; Steel starting guide pin allows routing curved work
  • EASY TO INSTALL: 9-inch x 12-inch (22.9cm x 30.5cm) plate with pre-drilled table mounting holes; Includes magnets and adjusting screws for securing and leveling the plate; 2 removable concentric rings allow for easy alignment when installing your router and give three different bit openings 3-7/8, 2-5/8, 1-1/4-inch (9.8cm x 6.7cm x 3.2cm); Underside is marked for centering the router prior to drilling
  • BUILT TO LAST: Constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on (not inside) the table; Plastic material makes it easy to drill holes for a custom router fit
  • CONTENTS: Package includes everything you need to mount your router to a table; (1) router plate, (1) guide pin, (4) magnetic holders, (1) Allen wrench hex key, and (4) screws; Router required, not included

Bosch Benchtop Router Table RA1181

Bosch Benchtop Router Table RA1181

    Features:

  • Benchtop router table design – Features a large aluminum top for extended work area, durability and precision
  • Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment
  • Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility
  • Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean
  • Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection
  • Accessory slot – Accepts feather boards and 3/4 inch optional accessories such as a miter gauge
  • Storage pocket – Allows storage of router accessories
  • Cord-wrap storage – Stores 6 foot power cord

Kreg PRS4036 Precision Router Table Insert Plate w/Level-Loc Rings – Compatible with Porter-Cable & Bosch

Kreg PRS4036 Precision Router Table Insert Plate w/Level-Loc Rings - Compatible with Porter-Cable & Bosch

    Features:

  • Measures 9-1/4″ x 11-3/4″ (235mm x 298mm); 3/8″ thick (9.5mm) phenolic insert plate
  • Comes w/ predrilled holes and mounting hardware to fit the Porter-Cable 690/890 Series, and Bosch 1617
  • Alignment marks make it easy to center and mount on almost any router

JessEm 02310 Rout-R-Lift II Router Lift and 02030 10-Piece Insert Ring Kit with Caddy Bundle (2 Items) (0231002030)

JessEm 02310 Rout-R-Lift II Router Lift and 02030 10-Piece Insert Ring Kit with Caddy Bundle (2 Items) (0231002030)

    Features:

  • Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5″ Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems
  • Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5″ diameter motors
  • Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease
  • Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations
  • Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability

PORTER-CABLE Router Height Adjuster (75301)

PORTER-CABLE Router Height Adjuster (75301)

    Features:

  • For use with 891 and 892 fixed base routers
  • Designed for use when router is inverted in a router table
  • Enables user to release the motor clamp, adjust bit height and secure the motor clamp from above the table
  • For use with 891 and 892 fixed base routers
  • Designed for use when router is inverted in a router table
  • Enables user to release the motor clamp, adjust bit height and secure the motor clamp from above the table
  • Weighs 1.4-Pound shipped
  • Accurate and precise

DCT Universal 6.5in Acrylic Router Table Base Plate Mount for Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

DCT Universal 6.5in Acrylic Router Table Base Plate Mount for Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

    Features:

  • MAKE ROUTING ENJOYABLE: Use the DCT Universal 6.5” Inches Acrylic Router Table Base Plate Mount for Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt to enhance your visibility and increase the stability of your router while accepting Porter-Cable style guide bushings to complete woodworking projects such as dovetailed drawers and more
  • USE YOUR ROUTER: Compatible router model numbers included Porter-Cable (690 series, 7529, 8529); Ryobi (Most models); Bosch (1615, 1617, 1618); Makita (Most models); Sears (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070, 315 275 100, 315 275 110); Fein (FT 1800); Milwaukee (5615, 5616, 5619); Freud (FT2000E); Hitachi – (M8V, TR12, M12V); Elu (177); Dewalt (621, 625, 616 series, 618 series)
  • EASY INSTALLATION: Mounting instructions included; Install and tighten Porter-Cable style guide bushing (not included), align 1/4-inch collect (not included) and plate on router, install included screws, insert included alignment guide pin in collet to tighten (for setting a template guide centered on router collect); Pre-drilled and includes screws for different routers; 1-3/16-inch main hole inner diameter with 1-3/8-inch surrounding stepped diameter that creates a pocket for standard bushing
  • INCREASE VISIBILITY: The transparent base is a plus when routing freehand as you can easily see the woodwork/lines for simple inlay; It is clear to show the bit contacting the material instead of working entirely by feel; Built to last with extra thick acrylic with 6.5-inch diameter and 5/8-inch thickness; acrylic material is durable but can be drilled to fit any scenario; Centering pin constructed from brass for strength and longevity
  • CONTENTS: Package includes (1) base plate, (1) alignment pin, (12) machine screws, and installation instructions for your convenience; Bushings, collect, and router not included

JessEm ROUT-R-LIFT II ROUTER TABLE PACKAGE for PORTER CABLE/DEWALT/BOSCH

JessEm ROUT-R-LIFT II ROUTER TABLE PACKAGE for PORTER CABLE/DEWALT/BOSCH

    Features:

  • JessEm included all you need for a top of the line system which includes the Rout-R-Lift II all new router lift solution.
  • Includes: Rout-R-Lift II (comes with 3 insert rings, 1-3/8”, 2”, 2-1/2”), Mast-R-Fence III (04400), Mast-R-Top (03006), Rout-R-Table Stand (05005), Clear Cut Stock Guides (04215), Pow-R-Tek Switch (05010).
  • Compatible with Porter Cable 690/890, Bosch 1617/1618, DeWalt 610/618, Craftsman 17543/17540/28190.

Bosch Cabinet Style Router Table RA1171 , Blue

Bosch Cabinet Style Router Table RA1171 , Blue

    Features:

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease; The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy; For added versatility, it’s pre drilled to fit a variety of routers
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback; They’re fully adjustable to fit a variety of work pieces; Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris; The dust collections ports fit standard 2 1/2 inch vacuum hoses
  • Convenience: Featuring a dual outlet switch with 6 feet power cord; Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims

PORTER-CABLE Router Edge Guide for Model 100, 690, 691, 693, 891, 892, 893 Routers (42690) , Black

PORTER-CABLE Router Edge Guide for Model 100, 690, 691, 693, 891, 892, 893 Routers (42690) , Black

    Features:

  • This is an O.E.M. authorized part
  • Fits various PORTER CABLE models
  • OEM Part Number 42690
  • This is a PORTER-CABLE replacement part
  • Part Number 42690.This is an O.E.M. part
  • Easy to use guide for your Porter-Cable router
  • Crafted from durable anodized aluminum
  • East to operate with dual sliding and lockable mounts
  • Provides clean, accurate results
  • Includes mounting hardware

As an Amazon Associate I earn from qualifying purchases.

Random products:

ncure
lqw