General Tools 881 E-Z Pro Crown King Molding Jig with Protractor

General Tools 881 E-Z Pro Crown King Molding Jig with Protractor

    Features:

  • 4 EASY STEPS: Perfectly mitered corner joints in four easy steps
  • ELIMINATE TRIAL AND ERROR: Makes accurately cutting crown molding a snap, eliminating trial and error and saving time and money
  • PROFESSIONAL GRADE JOINTS: Cut perfectly mitered interior and exterior corner joints
  • MULTIPLE ANGLES: 45° spring angle crown molding jig with adapter for 52° and 38° angles
  • ELIMINATES: Difficult angle calculations, coping of joints or compound-angle cutting
  • INCLUDES: Comes with an adjustable Angle Finder that easily shows you the exact angle of inside and outside corner
  • NO ASSEMBLY: Simple instructions show you how to get the right cut every time

Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig

Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig

    Features:

  • Crown-Cut crown molding cutting jig.
  • The safest and easiest way to cut crown molding.
  • Eliminates trial and error.
  • Made from durable polymer in the USA.
  • Fits all 10″ and larger miter saws.

Fuller Tool 320-0755 Ogee Cut Crown Molding Cutting Guide moulding jig hanger installation corners tool trim curved 45 degree cuts for miter saws power radial table home carpentry renovation or repair

Fuller Tool 320-0755 Ogee Cut Crown Molding Cutting Guide moulding jig hanger installation corners tool trim curved 45 degree cuts for miter saws power radial table home carpentry renovation or repair

    Features:

  • Simplifies the process of cutting curved crown mouldings into five easy steps
  • Can be used with power mitre, radial and table saws; also suitable for manual mitre saws
  • Ideal for practically any home carpentry, renovation or repair projects
  • Creates snug-fitting 45-degree cuts without having to tilt the saw blade
  • Measures approximately: 12-1/2 in. x 4 in. x 3 in. (31 cm x 9.5 cm x 8 cm)

beiyoule Trim Gauge Tool Flush Trim Jig for Bullnose Corners Crown Molding 3/4 Round Drywall Corners Layout Perfect Lines Top and Bottom Bearing Router Bit – 102x72mm

beiyoule Trim Gauge Tool Flush Trim Jig for Bullnose Corners Crown Molding 3/4 Round Drywall Corners Layout Perfect Lines Top and Bottom Bearing Router Bit - 102x72mm

    Features:

  • Package includes: 1pc x Bullnose Trim Gauge
  • Great for installing both crown and base molding.
  • Durable hard ABS plastic construction will hold up to years of use.
  • Accurately mark bullnose corners for exact trim measurement and placement.
  • 【Suitable for】Simplify trim work on 3/4inch rounded drywall corners with this clever jig.

Milescraft 1405 Crown45 – Crown Molding Tool, Yellow

Milescraft 1405 Crown45 - Crown Molding Tool, Yellow

    Features:

  • Compact design works with most miter saws
  • Makes right-side-up cutting of 2″ to 5-1/2″ Crown molding
  • Supports Crown molding between 2″ to 5-1/2″
  • Adjustable angle setting with angle finders for creating common molding spring angles (38°, 45° and 52°)
  • Saw blade enters the material from the front
  • No compound cuts necessary

Replace for 10-030 Trim Gauge Tool Flush Trim Jig for Bullnose Corners Crown Molding 3/4 Round Drywall Corners Layout Perfect Lines Top and Bottom Bearing Router Bit Red

Replace for 10-030 Trim Gauge Tool Flush Trim Jig for Bullnose Corners Crown Molding 3/4 Round Drywall Corners Layout Perfect Lines Top and Bottom Bearing Router Bit Red

    Features:

  • Simplify the trimming of 3/4 round drywall corners and helps layout perfect lines for tight-fitting three-piece corners
  • Durable hard plastic construction will hold up to years of use
  • Nail it in place to anchor your tape measure
  • Please confirm the model before purchase

Kreg KMA2800 Crown-Pro Crown Molding Tool

Kreg KMA2800 Crown-Pro Crown Molding Tool

    Features:

  • No compound cuts necessary
  • Eliminates coping of joints
  • Curved design matches any spring angle
  • Angle-finder included
  • Compact design works with most miter saws

F7 Crown Molding Clips for Quick and Easy Crown Molding Installation Designed to Hang Crown molding ONLY Between The Sizes of 4.25″ to 5.75″

F7 Crown Molding Clips for Quick and Easy Crown Molding Installation Designed to Hang Crown molding ONLY Between The Sizes of 4.25" to 5.75"

    Features:

  • THE ONLY CROWN MOLDING ACCESSORIES YOU’LL NEED: Save time and money while putting up crown molding. No more using nails or having nail holes to fill. No searching for studs or ceiling joists. No sanding and – best of all – only minimal clean-up.
  • INNOVATIVE CLIPS FOR INSTALLING CROWN MOLDING: Our unique F7 Crown Molding Clips are the first clips engineered to quickly and easily hang either MDF or wood crown molding. One package of 7 sets of clips will hang one 16-foot section of crown mold.
  • STRONG AND DURABLE CROWN MOLD CLIPS: Weighing in at only half an ounce, F7 clips are made of strong and durable ABS plastic. Each of our crown molding hangers are also small and easy to handle, featuring dimensions of 1.5″ W x 1.75″ D x 2.3″ H.
  • A VERSATILE CROWN MOLDING ACCESSORY: Ideal for both professional contractors and DIYers of all skill levels, these crown molding clips are very easy to use and install, so hanging crown molding can conveniently become a one-person job.
  • FULLY PATENTED CROWN MOLDING TOOL: Designed to hang crown molding ONLY between the sizes of 4.25″ to 5.75″, our fully patented F7 crown molding attachments are made in America from 100% recycled materials. Please note that screws are not included. Thinner molding requires two shorter wood screws #8” x 3/8” on the 7 Clip. Put Crazy or Super Glue in the two bottom holes. Keep a #8” x 1/2″ wood screw on the top hole of the 7 Clip.

DEWALT Miter Saw Crown Stops (DW7084)

DEWALT Miter Saw Crown Stops (DW7084)

    Features:

  • Miter saw crow stop accurately positions crown molding vertically against the saw fence
  • Includes 2 stops – one for each side of the blade
  • Designed to work with DEWALT models DW703, DW706, DW708, DW712, DW715, DW716, DW717 and DW718

NXPOXS Replacement DW7084 Crown Moulding Stop for DEWALT Miter Saw DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

NXPOXS Replacement DW7084 Crown Moulding Stop for DEWALT Miter Saw DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

    Features:

  • These replacement Crown Stops are designed to fit for DeWalt miter saw DWS779 DWS780 DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718
  • Easy to adjust, strong and ridged. Replace for DEWALT DW7084.
  • Package include: 2 crown stops,one for each side of the blade, 2 screw knob, 2 nut clips.
  • Measures 6-1/2-x-4-1/2 inches.
  • These crown stops accurately position crown molding vertically against the saw fence.

As an Amazon Associate I earn from qualifying purchases.

Random products:

ez barbell
ews emulator