Digital Caliper, Adoric 0-6″ Calipers Measuring Tool – Electronic Micrometer Caliper with Large LCD Screen, Auto-Off Feature, Inch and Millimeter Conversion
- Precise measurement: Measurement range: 0 – 6”/ 0 – 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring
- 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
- Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
- Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
- Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 – 6 Inches | Inch/Fractions/Millimeter Conversion,Silver/Black
- THREE MEASURING MODES: one button quick change between three measuring modes: inch, fractions, millimeter
- PRECISION | ACCURACY: Measurement Range: 0 – 6” and 0 – 150mm; Resolution: 0.0005” / 1/128” / 0.01mm; Accuracy: 0.001” / 0.02mm
- STAINLESS STEEL: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use
- VERSATILITY: measure inside, outside, depth and step with two sets of jaws and the probe
- EASY READ VISIBILITY: extra large LCD screen for easy and clear reading
- BONUS: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value
Digital Caliper, MOOCK 0-6 inches Calipers Measuring Tool with Stainless Steel, Electronic Micrometer Caliper with LCD Screen, IP54 Waterproof Protection Design, Inch Milimeter Fractions Conversion
- 1. [High Quality Standard]: This Digital Calipers 6 inch are made of full-covered stainless steel that is smooth to glide along the beam with depth-measurement probe and precision ground jaws. It also comes with IP Grade 54 to block out dust, and water splash that may otherwise affects the accuracy of the caliper.
- 2. [Precision&Accurate Measurement]: With an accuracy within .0005-inch/.01-mm, this digital caliper has been a great helper for both professionals and home use. This allows you to set zero and start a new measurement at any point of the scale and instantly converts between inch/millimeter/fractions with an easy touch of a button.
- 3. [Extra Large LCD Display]: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper. Measures internal and external dimensions, diameters, depth and steps in inch/millimeter/fractions.
- 4. [User-Friendly Functions] This digital caliper is equiped with grooved machine and roller thumb provides an easy fine adjustment, an accurate position lock for a sure adjustment, and comes with a brand new 3V battery, plus, with its 5 minutes non-operation auto-off function, this will never arrive with dead or weak batteries.
- 5. [Decent Tool Set]: Packed in a sturdy case with an extra 3V battery and a mini screwdriver for battery replacement. Makes a great choice ideas for machinists, woodworders, Jewelers and craft lovers. Comes with ONE YEAR WARRANTY for complete satisfaction you can count on!
Beslands Digital Electronic Display Micrometer 0-1″ / 0-25mm Gauge 0.00004″ / 0.001mm Thickness Measuring Tools Inch/Metric Caliper, Protective Case (with Extra Battery)
- Measuring range: Large measuring range at 0-25 mm (1 “) and the resolution is 0.001 mm (0.00005”).
- Spindle diameter 6.5 mm, hardened stainless steel lockers
- LCD Screen: LCD with electronic digital display, easy to read.
- 3V button Battery: CR2032 lithium battery, high capacity, durable and safe
- mm / inch conversion / zero position at each position / incremental or absolute measurements
VINCA DMCA-0105 Digital Outside Micrometer with Carbide Tip 0-1″/0-25mm Measuring Range 0.00005″ /0.001 mm Resolution Red Black Precision Machinist Tool
- Quality digital outside micrometer with choice of measuring range and flat anvil/spindle pair for general purpose measuring
- LCD (1.25″ x 0.5″) performs direct inch/metric conversions and has a switchable resolution of 0.00005″/0.001mm; Or using micro drum to measure without digital function
- Measuring range: 0-1″/25mm; Accuracy: +/-0.002mm; Featured Absolute/Relative measuring, Data hold, Tolerance setting function
- Hard Carbide Tip measuring faces provide wear resistance; Ratchet thimble and fixed thimble for precise application of pressure on object
- Laser etched graduations and satin chrome finish for super precision and no glare
Anytime Tools Dial Caliper/Micrometer/Stainless Steel Ruler Professional Machinist Inspection Tool Set
- Quality machinist grade inspection tool set
- Dial Caliper: Measure 0-6″ @ 0.001 Graduations Shock Proof Stainless Steel Hardened
- Micrometer: Measures 0-1″ @ 0.0001 Graduations Carbide Tipped Anvil
- Ruler: Measures 0-6″ Stainless Steel Hardened
- Molded case
Digital Caliper, 6 inch Micrometer with Large LCD Screen, Inch and Millimeter Conversion Vernier, Measuring Tool for Household DIY
- 【LARGE LCD SCREEN 】Our caliper has a large LCD screen which is easy to use and read even under strong sunlight. It provides accurate measurement.
- 【PRECISE MEASURMENT】Measurement range: 0 – 6″/ 0 – 150mm; Resolution: 0.01″/ 0.1mm; Accuracy: ±0.2mm/0.01″.
- 【4 MEASURING MODES】Our caliper can be used to measure inside and outside diameter, depth and step with 2 sets of jaws and a probe.
- 【INCH/MILLIMETER】The Inch/mm modes can be switched easily.
- 【WHAT YOU GET】iMooKyo Digital Caliper, User Manual, 3PCS LR44 1.5V Battery, our 18-month warranty and friendly customer service.
VINCA DCLA-0605 Electronic Digital Vernier Micrometer Caliper Measuring Tool Stainless Steel Large LCD Screen 0-6 Inch/150mm, Inch/Metric/Fractions, Red/Black
- Higher quality lower price stainless steel digital caliper with inch/metric/fraction conversion; Home DIY and professional use are both highly recommended
- Fine polished stainless steel and NEW processing of depthometer’s groove give better looking, smooth sliding, and accurate result
- Measure Range: 0-6 inches/150mm; Display: 1/2″x1 1/2″ (13mm x 38mm) extra large screen; Accuracy: ±0.001″/0.03mm; Resolution: 0.0005″/0.01mm, 1/128″
- Each digital caliper has been fully calibrated before ready to sell (NO calibration certificate included in this model. Please purchase DCLA-0605C for NIST cert)
- Featured RS232 Data transfer port, must connect with “VINCA DTCR-03” Cable (sold separately, not included) to make data transfer to PC. DO NOT CONNECT WITH REGULAR USB CABLE. Patent in the US; Comes with one extra battery
As an Amazon Associate I earn from qualifying purchases.