iGaging Reloading Micrometer Tube Ball Spherical Anvil 0-1″/0.00005″ Gunsmith X Large Display Gen 2
- 2 measuring modes Metric/Standard. Extra Large LCD Display.
- Carbide spindle tip
- Ratchet Stop
- Measure case neck thickness and uniformity
- Accuracy +/- 0.00016″ Range: 0-1″
Features:
Mitutoyo 115-313, 0 – 1″ X .0001″ .185″ Dia. Spherical Anvil Tube Micrometer, Ratchet , silver
- Carbide spindle
- Clear graduations on satin chrome finish
- Hammertone baked enamel finish
- Ratchet Stop
- Supplied in fitted plastic case
Features:
Anytime Tools Tube Micrometer Reloading Ball Spherical Anvil Case Thickness 0-1″/0.0001″ – Blue Frame
- Clear graduations on satin chrome finish
- Carbide spindle tip
- Ratchet Stop
- Measure case neck thickness and uniformity
- Accuracy: 0.0001″ Range: 0-1″
Features:
Mitutoyo 395-363-30 BMB3-1″MX Tube Micrometer, IP65, Type C, 0″-1″, 0.00005″/0.001 mm
- Designed to measure the wall thickness of various tubing
- With Ratchet Stop for constant force
- IP65 water/dust protection
- This series has two combinations of measuring faces: spherical-flat type, and spherical-spherical type. Both are carbide tipped
Features:
RCBS 87324 Vernier Ball Μm
- Used to measure the neck thickness of cases
- Vernier ball micrometer
- Ally metals body and thimble with matt finish
- RCBS is the leading manufacturer of ammunition reloading equipment for rifles and pistols
- Precision crafted
- Engineered for durability and longevity
Features:
Fowler 52-244-101-1, Ball Anvil And Ball Spindle 0-1″ Measuring Range
- Micrometer Gage: The micrometer features a ball anvil and spindle for the measuring of wall thickness of tubes, sleeves and collars at a single point.
- Accurate Measurements: Anvil and spindle hardened and precision ground with microlap carbide finish on tips; 0.256″ diameter of measuring faces, 0.0001″ graduation, and ± 0.00016″ accuracy for precise readings
- Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp; ratchet stop thimble applies constant force for repeatability between users
- Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames; the finish on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life
- Set Includes: A ball-anvil tube micrometer, a wrench, and a fitted case
Features:
Anytime Tools Tube Micrometer Dual Ball Anvil Round Carbide Tip Pipe Cylinder (Ball on Both anvils)
- Professional Quality Precision Measuring Tool. Accuracy: 0.0001″.
- Microfine graduations on satin chrome.
- Anvil and spindle hardened and ground with Carbide Tips; spindle thread hardened.
- A wrench is included for quick and easy zero adjustment on sleeve.
- Ratchet stop thimble for exact readings. Includes fitted case.
Features:
Fowler 54-860-113-1, IP54 Digital Ball Anvil Micrometer with 0-1″/25mm Measuring Range
- Digital Micrometer: Features a large, easy-to-read LCD including a choice of measuring range; a ball anvil/flat spindle pair for general purpose and tube wall measuring
- Precision Measurements: Features a 0-1″/25mm range and an accuracy of 0.00016″/0.004mm; this micrometer has a ratchet thimble that provides smooth and quiet performance and is suitable for one-handed operation
- Easy to Use: Digital micrometer features a large LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005″/0.001mm; IP54 specifications for dust and water protection
- Data Output: Digital micrometer gage with RS-232 output that provides the ability to export readings to a computer (cable not included)
- Set Includes: A Fowler electronic micrometer, 2 CR-2032 batteries, instructions, and a fitted case
Features:
Mitutoyo 295-253, 0 – 1″ X .0001″ Spherical Anvil and Spindle, Digit Outside Micrometer, Ratchet
- Carbide measuring faces
- Clear graduations on satin chrome finish and easy to read digit counter
- Spherical anvil and spindle
- Ratchet stop
- Supplied in fitted plastic case
Features:
Fowler 54-860-211 Electronic IP54 Ball-Anvil/Spindle Micrometers, 0-1″/0-25mm Measuring Range, 0.00005″/0.001mm Resolution, RS-232 Output
- Digital outside micrometer with ball-style anvil/spindle pair and choice of measuring range measures inside and outside diameters of sleeves, collars, tubing, and other curved and cylindrical surfaces
- LCD performs direct inch/metric conversions and has a switchable resolution of 0.00005″ and 0.001mm
- Friction thimble provides smooth and quiet operation, and is suitable for one-handed operation
- Certified IP54 for dust and water protection
- RS-232 output provides ability to export readings to a computer (cable not included)
Features:
As an Amazon Associate I earn from qualifying purchases.
